Autodesk 235B1-05A761-1301 - AutoCAD MEP 2010, User Manual

Page: 617 / 878

Customizing Style-Based
Content
You create style-based content by creating and configuring a new style.
To create schematic symbols, devices, panels, and plumbing fittings, which can require different appearances in different
views (top, left, and so on), you also need to create the AutoCAD blocks (or an MvBlock) for the required views of the
styles.
Workflow for Creating Style-Based Content
You create style-based content using the following high-level process:
View more information Review the steps
See Creating a Style-Based Content Library on
page 600.
-----
Create or open the content library
(DWG file) to contain the new
style-based content.
You perform this step if you are creating a
schematic symbol, device, panel, or plumbing
-----
Create at least one AutoCAD block
to assign to a style view.
fitting, in the library drawing, create at least one
AutoCAD block to assign to a style view. For more
information, see
Creating the Blocks for a Style
on page 600.
As part of this step, you assign the blocks to
different views of the style. For more information,
see
Creating a Style on page 601.
-----
Create and configure a new style
using Style Manager.
13
599