Assembly
1. Fix the hot shoe
from your tripod to the
underside of the
mounting plate. Slide
the hot shoe to the
approximate position
and tighten the
screws.
Components
A
Hood and
Glass
B
iPad
C
Mounting
Plate
D
Hood
Adjustment
Screws
D
C
A
B
2. Mount the unit
on the tripod.
6. Raise the hood up into
the vertical position.
7. Lock the hood into
position by tightening
the two thumb
screws. (B)
4. Place the iPad so that
the front edge is under
the retainer
(C)
If you have an iPad 2
please use the adaptor
kit provided.
5. To secure the iPad
in place slide the
retainer forward so
that the corners of
the iPad are located
in the mount.
(D)
3. To mount the iPad
loosen the thumb
screws
(B)
and slide
the carrier to the
open position.
Use two fixing if possible.
(B)
(B)
(C)
(D)
Vertical position
