Installation & Operation
Installing the Timer
Using a small screw driver, remove the bottom
screw from the wall switch you want the unit to
operate. Place the unit directly over the switch
plate cover. You do not need to remove the
existing switch plate cover. Open the AutoChron
unit and align the screw hole inside the unit just
below the tab area with the hole in the switch
plate cover that held the bottom screw. Secure
the AutoChron unit to the switch plate using the
enclosed longer replacement screw.
Now Your unit is installed and ready to operate.
Using the Timer
Be sure to slide the timer’s toggle switch tab
to the far left to engage the timer. If the tab
remains in the far right position, the unit will
not engage the switch and will not be able to
turn the switch off and on at programmed
times.
Manual Override
Push the ON or OFF button on the unit to
turn the switch on or off as desired between
programmed settings OR slide the timer’s
toggle switch tab to the far right to disengage
the timer from the switch. You can then
manually flip the toggle switch on or off as
desired between programmed settings.
NOTE:
If the toggle switch tab remains disengaged, it cannot turn
switch on or off at programmed times.
14
