Cautions, warnings, and regulatory information
Important:
When the notification appliance emits light or sound, it indicates the possibility of an emergency situation that requires immediate
attention of all occupants.
SAFETY:
Always install, maintain, and test notification appliances within their specifications. Failure to follow all safety precautions
and instructions may result in loss of life and property due to non-functioning notification appliances. Some notification appliances
use high voltage. To avoid electrical hazards and avoid damage to appliances, make sure that the electrical power for the Notification
Appliance Circuit is disconnected at the control unit before installing, repairing, or internally adjusting any notification appliances. Even
with electrical power removed, some notification appliances (such as visible strobes) store a high voltage charge. The high voltage can
cause injury resulting in death from electrical shock. DO NOT TOUCH EXPOSED CIRCUITRY.
LOCATION REFERENCE:
Location and quantity of appliances required must conform to the applicable local standards and guidelines
(the National Fire Alarm and Signaling Code (NFPA 72); ULC Standard CAN/ULC-S524, Installation of Fire Alarm Systems; the appropriate
model building codes) and specific requirements of the local Authority Having Jurisdiction (AHJ). These notification appliances are not
intended for installation within hazardous locations as defined by the National Electrical Code (NEC) or NFPA.
UL listed TrueAlert ES indoor product identification reference
Table 1: Product identification reference
Type
Colors
Models
Wall Mount
Audible Only
(A/O)
Red
White
Components:
A59AO-APPLWR
A59AO-APPLWW
Covers:
A59AOC-WRF
A59AOC-WWF
A59AOC-WRFAB
A59AOC-WWFAB
A59AOC-WRFQB
A59AOC-WWFQB
A59AOC-WRS
A59AOC-WWS
Operation
These appliances provide an audible (AO) warning of an alarm condition when activated from the control panel of a compatible
UL/ULC Listed, Autocall Fire Alarm System.
Note:
For information about TrueAlert ES appliance testing, refer to
TrueAlert ES Addressable LED Appliances Troubleshooting
(579-1168AC).
*One appliance
*One cover
Two 6-32 1 in. mounting screws. Do not over tighten.
Required parts:
*Autocall parts
Single gang electrical box, 1 1/2 in. minimum depth required.
Mounting instructions
1.
Select the mounting location, and install the electrical box.
2.
Connect the building wires to the appliance. See
3.
Use the provided hardware to secure the appliance to the electrical box.
4.
Set the appliance settings. See
Setting the address DIP switch
5.
Attach the cover to the appliance.
Figure 1: Mounting instructions
579-1200AC Rev. E
TrueAlert ES Addressable Indoor Audible Notification Appliance installation instructions
*05791200ACE*
