7
Monitor menu settings
● Press the
M
to access menu mode.
● Press ▲ and ▼ to increase, decrease or advance the following menu items:
Pair:
pair the monitor with backup cameras.
B/C Control:
adjust the monitor brightness and contrast.
M/U Control:
switch to Mirror/Normal/Up/Down image.
Guide Line:
activate or deactivate guidelines.
Reset:
return to factory settings.
Note:
No operation for about 5 seconds, the monitor will automatically exit setup state.
Basic operations
Choose the sizes of guidelines
1.
Set the guideline ON on menu.
2.
Press and hold M for about 4 seconds until the guidelines flick.
3.
Press ▲ or ▼ to choose from 6 different sizes.
4.
Press
M
to confirm.
Note:
The guidelines setting screen will close automatically if no operation is performed for about 5 seconds, then the settings will be saved.
Pair the Cam2 (If you have installed two cameras)
1. Press
M
to enter the main setting menu.
1.
Select Pair by pressing ▲ or ▼, press M to enter into Pair.
3.
Select CH2 (the second channel) by pressing ▲ or ▼, press M to confirm. The indicator on the monitor will flash indicating the monitor is
ready to pair.
4. Shift your vehicle into reverse gear (If your camera is powered by reversing light). The pairing will start when the camera gets power.
5. The monitor will display the image of Cam2 when the pairing is successful.
Pair
B/C Control
M/U Control
Guide line
Reset
