Auto-Trail Apache 632, Owner'S Handbook Manual

Page: 23 / 68

22 www.auto-trail.co.uk
Entertainment System
: Owner’s Handbook
press the ‘eject’ button on the head unit and the
radio front will swing down to allow the disc to be
inserted. The radio front will close automatically
when the disc has been inserted.
The unit will operate with the existing vehicle
speakers and the DVD image will be displayed
on either the head unit or the LCD monitor (if the
monitor is switched on).
The Digital / LCD Monitor Isolator Switch
The LCD monitor and digital receiver are powered
by the on board power supply (PSU) which is
located in the PSU locker. Ensure that the 12V
supply is turned on at the control panel.
An isolator switch is located under the PSU that will
cut the 12V power to the monitor and digital receiver
and should be pressed to the off position if the
vehicle is to be left for a prolonged period of time.
To view either the digital channel or DVD on the TFT
monitor this switch must be in the on position.
Remember; always press this switch to the off
position if leaving the vehicle for a prolonged
period of time to stop the leisure battery being
discharged to dangerous levels.
LCD Monitor
The LCD monitor can be used to view either the
DVD or digital images.
Turning On / Off LCD Monitor
To turn the monitor on or off press the
‘power’ button.
To Watch Digital Television
To watch digital television turn on the digital receiver
with the power button on the remote control and
ensure that the TV antenna is in the up position and
switched on (the red LED will illuminate on the TV
booster).
To Tune In The Digital Receiver
To tune in the digital receiver press the ‘Menu’
button on the remote control to access the main menu.
• Using the direction buttons on the remote
control select ‘scan’ and press the ‘enter’ button
• Select ‘Auto Scan’ and press the ‘enter’ button.
The screen will show the message box
’scan progress’.
• When the scan is finished (the display will
show 100%) the screen will show the number
of channels found – press the ‘enter’ button to
save the channels.
Please note that this operation will need to be
carried out every time you move into a new
digital transmission area.
Digital Sound
To listen to digital sound the radio unit must be
switched to the ‘AV in’ setting via the ‘mode’ button
on the radio front or via the remote control.
To View DVD On LCD Monitor
To view a DVD on the LCD monitor insert DVD into
the head unit and press the AV button on the
remote control.
Reversing Camera
On the rear of your vehicle there is a night vision
camera installed.
To operate the unit select the reverse gear and the
monitor in the dashboard radio will display the
image direct from the reversing camera.
Radio OFF
If the radio is turned off or in standby mode,
selecting reverse gear will automatically turn the
radio on and display the image from the camera.
This operation will take approximately 5 seconds.
When reverse gear is de-selected the radio head
unit will return to off.
Radio ON
The selecting of reverse gear will stop the radio
playing your music or DVD and the monitor will
display the image shown by the camera.
When reverse gear is de-selected the radio will
revert back to its previous activity.
Please note that the reversing camera fitted
to this vehicle should be treated as an aide to
your reversing. Auto-Trail VR Limited will not
be held responsible for any accidents caused
by driver carelessness.
2090 AT Cheyenne-Frontier Owners Handbook REPRO 2:Layout 1 18/11/08 14:40 Page 22