Auto Test BST-380, User Manual, Page: 17 / 28

damaged. Check and replace the diode. Until now, all tests have been done.
If client code setting function is off, press the OK key again, it will then prompt
“Print Result?”, press OK key to print.
If client code setting function is on, press OK key again, it will then prompt “Print
Result?”, press the OK key to input the client code. After client code input, press
the OK key again, it will prompt “Print Result?”, press the OK key to print.
3.6 Client code Input
Client code in a sequence, 1st to 7th digits are letters or numbers. When pressing UP/
DOWN keys, numbers and letters will be displayed in a scrolling manner, select the
number or letter needed, press OK key to confirm and carry on the input for the next
digit.
For example, to input “BA8888”.
Press the UP/DOWN key to select the first Chinese character “BA”, press OK to finish
the first digit input.
Press the UP/DOWN key to select the second letter “B”, press OK to finish the second
digit input.
Continue unil the 7th digit input is finished.
Press the OK key again, the tester will print out the test result including the plate
number.
NOTE: For languages other than Chinese, the client code input method is the same (first
digit changed to number or letter).
CLIENT CODE
AA88888
CLIENT CODE
BA88888
CLIENT CODE
BB88888
CLIENT CODE
BB4F50N