7
© 2012 Directed. All rights reserved.
Advanced Commands
Press
and release the
once, followed quickly (within 2 seconds)
by pressing and releasing another command button.
Silent Arm
Press
and
release
, then
press
and release
The alarm arms, doors lock (if connected), and the parking lights flash
once.
Silent Disarm
Press
and
release
, then
press
and release
The alarm disarms, doors unlock (if connected), and the parking lights
flash twice. The Silent Disarm output may be replaced by the Alarm
Report*
Sensor bypass
At any time while the system is armed,
press
and release the
button on the remote and then within 2 seconds,
press
and release the
button again to enable the sensor bypass mode.
Repeating the previous steps incrementally bypass sensor operations
and are confirmed as follows:
s
Warn-away bypass: the parking lights flash 2 times as confirma-
tion. The sensors respond to full trigger levels of impact only.
s
Warn-away and full trigger bypass: The parking lights flash 3
times as confirmation. The sensors do not respond to any level
of impact.
s
Sensor bypass OFF: The Parking lights flash 1 time as confirma-
tion. The sensors are fully operational.
