Quick Installation Guide
P a g e
|
5
Installation
Unwrapping
Make sure the unit is not damaged in transport, and that
these parts are in the box:
The RP 410 Remote Panel
A bag of screws and nuts
Panel Installation
The RP 410 is intended as a remote command and
monitoring panel, and as such can be installed in the
engine control room or in the wheelhouse.
The RP 410 should be installed in suitable enclosure, and
it must have easy operator access.
Make an enclosure cutout of 307 x 183mm (W x
H).
Drill holes with Ø=3.5mm for the four fastening
screws.
Using the 3mm screws and nuts, securely fasten
the RP 410.
