The Modbus Watchdog can be used to detect loss of communication to an
external device.
4.3.17 EGT (Exhaust Gas Temperature)
4.3.17.1 Cylinder Deviation Event
The deviation is the difference between the cylinder value and the average value. Deviation
is positive (above zero) if the cylinder value is above the average, and negative (below zero)
if the cylinder value is below the average.
home / dcu / i/o configuration / egt / cylinder deviation
event
4.3.17.2 Turbo Deviation Event
The deviation is the difference between the turbo value and the average value. Deviation is
positive (above zero) if the turbo value is above the average, and negative (below zero) if the
turbo value is below the turbo average.
4.3.18 Constant
Constant signals can be used in the DCU to define a constant value. This constant value can
be used to realize sensor signal offset using differential signals.
home / dcu / i/o configuration / constant
4.3.19 Logical Signal
Logic signals can be used to define internal logical signals based on Boolean algebra.
The logical signals can be configured for view, alarm monitoring, and they can be connected
to any configurable output.
Page 48 (99)
