PLC-ANALYZER pro 6 - PILZ PSS / PNOZ
5 / 7
First give the driver a meaningful
name
. Then set the
IP Address
and the
Port
of the PLC or the
Comport
to which the PLC is connected. These settings can be found in the configuration of your PSS WIN-PRO
project.
Under
PLC type
, specify whether you want to record data from the
Standard part
or from the
Fail-safe
part
of a PSS CPU or from a
PNOZmulti
.
Press
Connection test
to check, whether a connection to the PLC can be established.
Under
Scan interval
you specify the time interval at which measured values are read out from the PLC. A
longer sampling interval can be selected for signal paths that are not time-critical, e. g. temperature. As
a result, the generated signal files become smaller.
Under
Symbols
, select a
Symbol file
to make the symbols available for address selection. This makes it
possible to use symbolc identifiers when entering addresses. In addition to the absolute address, the
symbolic identifier and comment are also displayed and stored in a signal- or project file.
After setting the communication properties, add the PLC signals to be recorded. When a symbol file is
loaded, the signals to be recorded can be conveniently selected from the symbol list by double-click or
drag and drop.
Summary of Contents for PLC-ANALYZER pro 6
Page 1: ......
