18
Check if the MaxiVCI Mini is properly positioned.
Check if the Connection LED on the MaxiVCI Mini is illuminated for
BT or USB.
In case of BT connection, check if the network is configured correctly,
or if the right MaxiVCI Mini has been paired up with the tablet.
If during the diagnosis process, the communication is suddenly
interrupted due to the loss of signal, check if there is any object
that causes signal interruption.
Try standing closer to the MaxiVCI Mini to obtain more stable
signals and faster communication speed.
In case of USB connection, check the cable connection between the
tablet and the MaxiVCI Mini.
Check if the Power LED on the MaxiVCI Mini is flashing red and if so,
it indicates there is a hardware problem with the MaxiVCI Mini, in this
case, contact technical support for help.
B. If the MaxiVCI Mini is unable to establish a communication link, a prompt
message displays with check instructions. The following conditions are
the possible causes:
The MaxiVCI Mini is unable to establish a communication link with the
vehicle.
The system selected for testing is not equipped on the vehicle.
There is a loose connection.
There is a blown vehicle fuse.
There is a wiring fault of the vehicle or the adapter.
There is a circuit fault in the adapter.
Incorrect vehicle identification was entered.
Getting Started
Ensure a communication link is established between the test vehicle and the
tablet via the MaxiVCI Mini.
