101
Measurement Setting
This multimeter can be used to measure or test AC voltage, DC voltage, resistance,
AC electricity, DC electricity, diode, frequency, duty cycle, pulse width, continuity
and period.
The measurement types include:
AC/DC voltage
: measures the voltage in the electrical circuit
Resistance
: measures the resistance of the electrical circuit or the component
AC/DC current:
measures current amperage through the input channel A by
using the optional current clamp
Note
The type of current clamp can be selected in the dropdown list.
Diode:
conducts
the diode test of the electrical circuit
Frequency:
measures
the frequency of the input signal
Duty Cycle (+)/(-)
: measures the (+) and (-) duty of the input signal
Connectivity
: determines whether a low impedance exists two points in the
electrical circuit. If the impedance is less than 100
ohms, the circuit is “closed”,
otherwise, the circuit is
“open”.
Period
: measures the amount the time that one complete cycle of the input signal
endures
Pulse Width (+)/(-)
: measures the pulse width of the input signal
To set the measurement setting
1. Tap the
Measurement Setting
button in the lower left corner of the screen. A
dialog box appears.
