Autel MaxiDAS DS808 User Manual Download

Page: 76 / 112

Settings

Selecting Settings application opens a setup screen, on which you can adjust
default setting and view information about the MaxiDAS system. There are
eight options available for the MaxiDAS system settings:



Unit



Language



Printing Setting



Firmware Upgrade



Notification Center



Auto Update



System Settings



About

This section describes the operation procedures for the settings.

Unit

This option allows you to adjust the measurement unit for the diagnostic
system.



To adjust the unit setting

1. Tap the

Settings

application on the MaxiDAS Job Menu.

2. Tap the

Unit

option on the left column.

3. Select the required measurement unit, Metric or English. A tick icon

will display to the right of the selected unit.

4. Tap the

Home

button on the top left corner to return to the MaxiDAS

Job Menu. Or select another setting option for system setup.

Summary of Contents for MaxiDAS DS808

















































































































Search results

Summary of Contents for MaxiDAS DS808

Reviews:

Related manuals for MaxiDAS DS808

Brands by name

Popular brands

Autel MaxiDAS DS808, User Manual

Search results

Summary of Contents for MaxiDAS DS808

Reviews:

Related manuals for MaxiDAS DS808

Brands by name

Popular brands