40
Charging Start Failure
If an error occurs when you start charging, the Charge Start Failure screen will appear.
The cause and possible solution(s) will display on the screen. Follow the on-screen
instructions to resolve the problem.
Charging Failure
If an error occurs during charging, the Charging Failure screen will appear. The cause
and possible solution(s) will display on the screen. Follow the on-screen instructions to
resolve the problem, or contact your local dealer or Autel Technical Support.
Energizing the MaxiCharger
To energize the MaxiCharger
1.
Set the upstream breaker that provides power to the MaxiCharger to
ON
.
2.
The MaxiCharger will start and be ready for operation.
De-energizing the MaxiCharger
To de-energize the MaxiCharger
1.
Set the upstream breaker which provides the power to the MaxiCharger to
OFF
and lock it. Make sure that this breaker stays in the OFF position during
the procedure.
2.
Open the front door.
3.
Measure the AC voltage by referring to
. Make sure
that all the measured voltages are 0 volts.
4.
Measure the DC voltage by referring to
. Make sure
that all the measured voltages are 0 volts.
5.
Close the front door.
Measuring the AC Voltage
Use a voltage tester to measure the AC voltage between the terminals on the surge
protection device switch:
L1 to L2
L1 to L3
L2 to L3
N to L1/L2/L3
