background image

To ensure safe and successful operation of your 
EVO NEST, please strictly follow the operating 
instructions and steps in this guide.
If the user does not abide by the safety 
operation instructions, Autel Robotics will not be 
responsible for any product damage or loss in 
use, whether direct or indirect, legal, special, 
accident or economic loss (including but not 
limited to loss of profit) and does not provide 
warranty service. Do not use incompatible parts 
or any method that does not comply with the 
official instructions of Autel Robotics to modify 
the product. 

1. DISCLAIMER

1

Check the appearance of the prod-

uct

·Check the canopy to make sure there is no 
damage caused by transportation or movement.
·Check whether the canopy is well sealed to 
ensure that it will work normally in a dusty or 
humid environment.
·Check the flatness of the charging board and 
the cleanliness of the position bar to ensure that 
charging can be carried out normally.
Note

If you find any problems, please contact 

the official support service of Autel Robotics at 
(844) 692-8835.

2

Pedestal installation

1.The charging pedestal has 4 arm fixing clips. 
The two shorter fixing clips are marked with E, 
and the higher fixing clip is marked with F. The E 
fixing clip is used to fix the rear arm, and the F 
fixing clip is used to fix the front arm.
2.After fixing the arm, install the battery to the 
drone, and connect the cable under the battery 
to the pedestal.

EVO NEST is an automatic drone charging 
station that enables industrial drones to land, 
takeoff, and carry out consecutive missions with 
no human intervention. Equipped with a retract-
able canopy, a glass-fiber charging board, and a 
built-in air conditioning system, the NEST has 
everything it needs to keep itself and its aircrafts 
in great working condition, no matter the weath-
er. Using exclusive software, operators can also 
plan flight tasks from the comfort of their home 
office, reducing labor costs while enhancing 
efficiency.

3. INTRODUCTION

4. PREPARATIONS

ITEM NAME

DIAGRAM

QTY

1

1

1

Charging 

Board

Canopy

Charging 

Pedestal

1

Waterproof 

Connector

2. ITEM LIST

1

2

Power Cable

Aircraft Battery

1

Quick Guide

1

Hex wrench

Reviews: