16
2) A warning message comes up asking for your confirmation.
I
f you do not wish to proceed to erase the codes, press
N
button or use
UP/DOWN
button to select
NO
and
then press
Y
button
to exit. A “
Command Canceled!
”
message shows up. Press any key or wait a few
seconds to return.
3) Press
Y
button to erase.
If the codes are cleared successfully, an “
Erase Done!
”
message shows up.
If the codes are not cleared, then an “
Erase Failure.
Turn Key on with Engine off!”
message displays.
C. Deactivate Brake
WARNING: Deactivate the SBC system before carrying out
any maintenance/service work on the brakes such as
changing of pads, discs and fluids!
Use proper tools to avoid the risk of body injuries of
mechanics and technicians and damage to the brake
system.
Make sure the vehicle is properly blocked after
deactivation of the system.
.............
Erase Codes
............ ...
Erase trouble codes!
Are you sure?
YES
NO
............
Select Function
...... ...
2/5
1) Read Codes
►
2) Erase Codes
3) Deactivate Brake
4) Activate Brake