15
In the
Code Breaker
screen, there are three options to assist user
to understand DTC more:
System Description
and
Quick Check
to read detailed description of DTCs,
General
Notes
to view
helpful repair information of DTCs.
4)
To view previous or next DTC in the built-in DTC library, use the
LEFT/RIGHT
button.
5)
To enter another DTC, press the
ESC
button to return to previous
screen.
6)
To exit to
Main Screen
, press the
ESC
button.
3.8
System Setup
The scan tool allows you to make the following adjustments and
settings:
1)
Language:
Selects the desired language.
2)
Configure Monitors
: Sets the monitors you want to test.
3)
Unit of measure:
Sets the unit of measure to English or Metric.
4)
Key Beep Set:
Turns on/off beep.
5)
Status Beep Set:
Turns on/off the I/M Readiness Status beep.
6)
Tool Self-test:
Checks if the LCD display, LED lamps and
keyboard are working normally.
7)
Update Mode:
Accesses the Update Mode.
Settings of the unit will remain until change to the existing
settings is made.
To enter the Setup menu
From the
Main Screen:
Use the
UP/DOWN
scroll button and
LEFT/RIGHT
scroll button to select
Setup
, and press the
OK
button.
Follow the instructions to make adjustments and settings as described
in the above setup options. (Figure 3.3)