46
1)
To record customized data, use the
UP/DOWN
scroll button to
select
Custom Data Set
from
Record Data
menu and press the
OK
button. (Figure 5.20)
2)
Observe on-screen instructions. (Figure 5.16). Press the
OK
button to continue; press the
ESC
button, or use
LEFT/RIGHT
button to select
NO
and press the
OK
button to return to
Record
Data
menu.
3)
Use the
RIGHT
button select/deselect data parameters. Selected
parameters are marked with solid squares. Press the
OK
button
to confirm. (Figure 5.17)
If you wish to deselect all marked items, press
LEFT
button.
A message comes up to ask for your confirmation.( Figure
5.18)
If you decide to deselect these items, press
OK
; if you decide
not to, press the
ESC
button, or use the
UP/DOWN
button to
select
NO
and press
OK
to continue PID selections.
4)
Use the
UP/DOWN
scroll button to select a trigger mode and
press the
OK
button.( Figure 5.21)
If data from previously tested vehicle is not erased, data from
current test will be stored in temporary cache.
5)
Use the
UP/DOWN
scroll button to select a memory location
and press the
OK
button.( Figure 5.22)
The asterisk (*) icon on the screen indicates that there is a
previous recording in the memory location.
If you select a location marked with an asterisk (*) icon, a
message prompting to overwrite old recording is
displayed.( Figure 5.23)
If you do wish to proceed with overwriting old recording,
press the
OK
button; if you do not wish to overwrite it, press