installation manual
5
affected in lightning storms.
2.2
Connect the Ethernet cable
Connect the ethernet cable (minimal CAT4) in the RJ45 connector of the Ethernet stick, to your local router
2.3
Check the connection
If the connection is successfully made you should see lights on both devices:
-
Ethernet Stick: The red LED on the inside near the RJ45 connection.
-
Router: in most cases, two lights will display on the router when the connection is transferring data.
You can also see whether the connection is correct on MyAutarco. Go to https://my.autarco.com/ and open the
‘monitoring setup’ page. Enter the Echternet stick serial number under ‘Check connection’ and click the button.
2.4
Registration
Congratulations you are now successfully connected and the Ethernet Stick is sending data to the Autarco
server. Follow the registration process on https://my.autarco.com/
