Bringing people together
Functioning
calling and conversation
When a call is received from the entrance panel, the monitor starts ringing for a maximum of 30 seconds. As standard,
it performs 4 rings with intervals of 4 seconds between each of them.
During the call period the image appears on the screen, the user can open directly, pressing the button
or
establish a conversation pressing the button
The conversation has a maximum of 90 seconds. If you want to
continue with the conversation, press the button
and then
OK
OK
self-starting
By pressings the button
and then
the user can establish communication with the PANEL / CCTV CAMERA
that he wishes in the case of more than one is present in the installation.
With each press
the system will automatically switch to the next device, showing the image and allowing the
opening of it by pressing the button
OK
calling to concierge
If the monitor is in standby, by pressing the button
and then
, a call will be made to the concierge unit. If
the system does not have a concierge unit installed, the monitor will emit an error beep.
OK
ding dong function
The monitor allows to replace the interior bell of the house, this integrates the two calls (outside panel and house bell)
in a single device. These calls will be differentiated with different melodies and flashes automatically. In order to have
this function, you only have to connect the button of the house bell to the monitor.
cctv surveillance function
The monitor allows the control of panels and CCTV cameras automatically. First we press the button
and
then
Each press on the button
activates a different device. To do this, each CCTV camera must be installed
with an Auta digital interface.
OK
external functions
The monitor has 1 independent push-button that allow auxiliary functions, such as garage doors, lights, irrigation,
etc ...
To do this, an Auta auxiliary relay must be connected to the control circuit we want to control.
melody selection and adjust of the calling volume
If the monitor is in standby, press
and then
. With each press
we will select a different melody and
a different calling volume.
There is 4 call melodies and 2 volume levels for each one (MEDIUM and HIGH)
OK
keypad activation at standby
IN STANDBY, to prevent unwanted presses, the monitor incorporates a security system in which the touch keyboard
remains locked until the push button
is pressed.
OK
EN