Bringing people together
Functioning
calling and conversation
When a call is received from the entrance panel, the monitor starts ringing for a maximum of 30 seconds. As standard,
it performs 4 rings with intervals of 4 seconds between each of them.
During the call period the image appears on the screen, the user can open directly, pressing the button
, or pick
up the handset to establish conversation. The conversation has a maximum of 90 seconds. If you want to continue with
the conversation, press the button
AUX 1/ON
self-starting
By pressing the button
the user can establish communication with the PANEL / CCTV CAMERA that he wishes in
the case of more than one is present in the installation.
With each press the system will automatically switch to the next device, showing the image and allowing the opening
of it by pressing the button
AUX 1/ON
ding dong function
The monitor allows to replace the interior bell of the house, this integrates the two calls (outside panel and house bell)
in a single device. These calls will be differentiated with different melodies and flashes automatically. In order to have
this function, you only have to connect the button of the house bell to the monitor.
privacy function
The monitor incorporates a privacy mode in which the ringing tones are muted for a selected time. If the privacy mode
is active, the monitor shows by flashes the selected period of time (1 flash -
2 hours
, 2 flashes -
4 hours
, 3 flashes -
8 hours
). After the selected period of time finished, the monitor automatically returns to standard mode. To activate the
privacy mode press the button
for 4 seconds (LED will start to blink), select the desired period of time by pressing
the button
. Each press will activate a different period of time between the 3 available ones.
AUX 2
AUX 1/ON
function door sensor
If a door contact is installed, the monitor allows monitoring, in real time, the entrance to the building. If the door remains
open for a longer period of time than stipulated in the settings, the system sends a visual alarm to all the monitors of
the installation that remains active until the door is closed correctly.
management of a second door
The Auta 2W system incorporates the management for 2 doors in its entrance panel. If we press the button
we will
activate the
RYa
panel relay and if we press the button
we will activate the
RYb
panel relay.
AUX 2
adjust of the calling volume
To adjust the volume of the call, insert a clip or similar through the indicated hole and press with it lightly.
The monitor has two volume levels (MEDIUM and HIGH)
melody selection
To select a ring tone, you have to pick up the handset and press the hang switch with your finger. With it pressed, a clip
or similar must be inserted in the indicated hole and press with it lightly.
Each press selects a different melody from 8 ones available.
EN
