entry and navigation through the settings menu
When the guard porter be in standby,
will be pressed
Directory menu
Settings menu
Configuration
(reserved for installation and commissioning adjustments)
Queue menu
Directory
Queue
Settings
Configuration
Main menu
Exit
Accept
OK
Select
Operation mode
Melody
Audio
Settings
Exit
Change
OK
Select
Standard
Direct
Do not disturb
Operation mode: Standard
Back
Change
OK
Select
Type:
1 / 8
Number of tones:
4
Volume:
- .
Back
Melody
+
Accept
OK
Select
Audio In:
- | |
Audio Out: - | |
Back
Audio
+
Accept
OK
Select
Standard -
The call from the street sounds in the guard porter, if it
is not answered, it is automatically re-directed to the flat.
Type -
Melody selection. There are 8 different.
Number of tones -
Selection of the number of tones. "0" silence.
Volume -
Selection of the volume of the tones.
Do not disturb -
The call from the street sounds in the guar porter,
if it is not answered, it will end in it.
Direct -
The call from the street sounds directly in the flat. The
guard porter can only monitorize. Do not intervene.
Audio In -
Adjust of the incoming audio volume.
Audio Out -
Adjust of the outgoing audio volume.
Directory
Exit
Call
OK
Navigate
Queue
Exit
Call
Delete
OK
Navigate
In this menu the list of flats that belong to the installation will appear. We can navigate through the
different registers and make a call. For them we will follow the steps described in the "Functioning"
section.
In this menu will appear the list of missed calls, made from flats, that have not been answered. We
can return a call or delete it directly.
We will know that there are missed calls because the station will emit a blue flash every second.
Adjust menu
