calling and conversation
When a call is received from the entrance panel, the phone starts ringing for a maximum of 30 seconds. As standard,
it performs 4 rings with intervals of 4 seconds between each of them.
During the call period, the user can open directly by pressing the button
, or pick up the handset to establish a
conversation. The conversation has a maximum of 90 seconds. If you want to continue with the conversation, press the
button
AUX 1/ON
INTERCOM calling
When the phone is on standby, press the button
as many times as the internal monitor number you wish to call. The monitor
makes a confirmation tone with each press and the status LED flashes as many times as the monitor number to which the call will be
made. After the handset is picked up, the system will activate automatic communication with the selected monitor.
self-starting
By pressing the button
the user can establish communication with the PANEL. In the case of more than one panel
is present in the installation the system will do the self-starting to the last one from which it recieves a call.
Once the communication is established, an opening can be made by pressing the button
AUX 1/ON
calling to concierge
If the phone is in standby, handset is picked up and the button
is pressed, a call will be made to the concierge
unit. If the system does not have a concierge unit installed, the phone will emit an error beep.
ding dong function
The phone allows to replace the interior bell of the house, this integrates the two calls (outside panel and house bell)
in a single device. These calls will be differentiated with different melodies and flashes automatically. In order to have
this function, you only have to connect the button of the house bell to the phone.
external functions
The monitor has 1 independent push-button that allow auxiliary functions, such as garage doors, lights, irrigation,
etc ...
To do this, an Auta auxiliary relay must be connected to the control circuit we want to control.
adjust of the calling volume
To adjust the volume of the call, insert a clip or similar through the indicated hole and press with it lightly.
The phone has two volume levels (MEDIUM and HIGH)
melody selection
To select a ring tone, you have to pick up the handset and press the hang switch with your finger. With it pressed, a clip
or similar must be inserted in the indicated hole and press with it lightly.
Each press selects a different melody from 8 ones available.
Functioning
