Austroflamm Flok 2.0, User Instructions

Page: 14 / 49

Flok 2.0 deutsch
14
Properties for exclusive operation with the preferred fuels
7
Specification Symbol Value Unit Specification Symbol Value Unit
Heat output Thermal efficiency (fuel efficiency) (based on the NCV)
Nominal heat
efficiency Pnom 4.0 kW Thermal efficiency (fuel
efficiency) at nominal heat
efficiency
η
th,nom 80.9 %
Minimum heat
output (standard
value) Pmin - kW thermal efficiency (fuel
efficiency) at minimum
heat output (standard
value)
η
th,min
- %
Auxiliary power consumption Type of heat output/room temperature control
At nominal heat
efficiency elmax - kW single-level heat output, no room temperature
control
yes
At minimum heat
output elmin - kW two or more manually adjustable levels, no room
temperature control
no
In standby
condition elSB - kW Room temperature control with mechanical
thermostat
no
Pilot flame power requirement with electronic room temperature control no
Pilot flame power
requirement
(if present) Ppilot - kW with electronic room temperature control and
daytime regulation
no
with electronic room temperature control and
weekday regulation no
Other regulation options
(Multiple answers possible)
Room temperature control with presence
detection no
Room temperature control with open window
detection no
with remote control option no
1 There is no entry for fireplaces without water-carrying components.
2
Values for annual use efficiency and emissions must be given here for the preferred fuel.
3 Values for annual use efficiency and emissions must be given here for all other suitable fuels.
4
Corresponds to partial load heat output as per EN 16510
5 Specification in mg/m³ for heated filter method (in compliance with Annexe III, number 4, letter a, section i,
point 1) or g/kg for measurement in dilution tunnel (in compliance with Annexe III, number 4, letter a, section
i, point 2 and 3.)
6 Specification mg/m³ for heated filter method (in compliance with Annexe III, number 4, letter a, section i,
point 1) or g/kg for measurement in dilution tunnel (in compliance with Annexe III, number 4, letter a, section
i, point 2 and 3.)
7 Specifications must be made here for the preferred fuel only