Operating manual Folding corner fireplace inserts
EN
13 | Handling
67
Door latch – hinged door
Unlocking
1) Press lock outwards
ð
Door frame is unlocked.
ð
Swing door out.
Locking
2) In the open door position (opening angle > 20°), re-
lease folding handle.
ð
Door frame closes by itself and the appliance is
ready for use.
13.2 Before lighting the fire
The stove can only function properly if there is sufficient combustion air coming to the room of installa-
tion (the appliance), specially if several firing installations are being operated at the same time. Ensure
sufficient air supply before heating up. Open the combustion air flap on the appliance and keep it
open for the entire combustion period.
Devices for the supply of combustion air must not be modified.
13.3 Fuel
NOTICE
To avoid damage you must
NEVER
operate your fireplace insert a greater quantity of fuel than that
specified in this manual!
Approved fuel
Dry, properly stored, unrefined log (preferably hard wood) is permitted as fuel for our hybrid stoves
Round wood must be split at least once so that it lights better. The diameter of the split piece of wood
must not exceed 7 cm.
Maximum fuel quantity
Every fireplace insert is designed for a maximum fuel quantity: see Technical Data [
}
auf Seite 14] sec-
tion.
Clean combustion
To achieve clean, low-emission combustion, dry (relative wood moisture < 20 %) and untreated fire-
wood must be used. (In addition to a lower calorific value, wet wood causes the panes of your fireplace
insert to become tarnished with soot more quickly). Secondly, the correct amount of firewood must be
burnt. Heat responsibly with dry firewood to protect both people and the environment.
Fuel
Only burn the recommended fuel.
