Operating manual Folding corner fireplace inserts
EN
11 | Installation
49
11.2.4 Mounting the firebox door
CAUTION
Risk of crushing injury
When removing the door, be careful not to trap your fingers/hand when the spring is released.
11.2.4.1
Removing the door
1) Open door up to 80 degrees.
2) Remove the locking plate above the spring.
3) Release spring.
4) Lift door vertically until the lower door bolt is free.
5) Pull the bottom of the door towards you so that the
bottom of the door is free.
6) Lower the door and release it from the upper mount-
ing.
11.2.4.2
Fitting the door
1) Position the door at a slight angle.
2) Insert the upper bolt.
3) Place door vertically.
4) Insert the lower bolt.
5) Lower door until the door is seated.
6) Tighten the spring until it engages behind the hinge
bearing.
ð
Be careful that the spring does not spring back-
wards again - CRUSHING HAZARD!
7) The door must be adjusted. Proceed as described in
the section Adjusting the door [
}
auf Seite 64].
