11 | Installation
EN
Operating manual Fireplac inserts slied flat + II
68
4
3
2
1
5
Fig. 37:
Mounting the exhaust manifold
4) Place exhaust manifold (5) on to the top storage box
and fasten it to the bolt (4) with clamping shoe (3),
washer (2) and hexagon nut (3) .
5) If necessary, bring the smoke collector into the correct
position. To do so, see section Adjusting the smoke
collector [
}
auf Seite 89].
11.2.9 Mounting top storage bricks
1
Fig. 38:
Removing the smoke collector
Top storage box is available for all models except for 75x39
SII, 75x51 SII and 80x64 SII.
1) Loosen hexagon nuts, washers and clamping shoe (1).
2) Remove smoke collector.