Engineered and Distributed by AUDIO TELEX COMMUNICATIONS PTY LTD (ABN 78 001 345 482), 149 Beaconsfi eld Street, Silverwater, Sydney, NSW, 2128 Australia
NSW
Tel: (02) 9647 1411 Fax: (02) 9648 3698
VIC
Tel: (03) 9890 7477 Fax: (03) 9890 7977
QLD
Tel: (07) 3852 1312 Fax: (07) 3252 1237
WA
Tel: (08) 9228 4222 Fax: (08) 9228 4233
SA
Tel: (08) 8352 4444 Fax: (08) 8352 4488
NZ
Tel: (09) 415 9426 Fax: (09) 415 9864
International Enquiries
- [email protected] www.australianmonitor.com.au
2 RU Stereo Power Amplifi ers
IS600, IS1200 & IS1600
The ampli
fi
er shall be 2 RU dual channel with low impedance output of 300 watts per
channel at 4 ohms/600 watts per channel @ 4 ohms/ 800 watts per channel @ 4 ohms.
The ampli
fi
er will have two dual speed fans, short circuit, overload, soft start & thermal
protection. Have switch operable ground lift, stereo/parallel operation, input gain sensitivity.
Inputs shall be balanced XLR or 6.35mm TRS type & speaker outputs
shall be Speakon or binding post type.
The ampli
fi
er shall be the IS600/IS1200/IS1600
IS600 Specifi cations
Output @ 8 ohms
2 x 200 watts
Output @ 4 ohms
2 x 300 watts
Frequency Response
<10Hz - >50kHz (-3dB)
THD
<0.03% @ 1kHz
Crosstalk 60dB
Damping Factor
250 into 8 ohms/ 125 into 4 ohms
Input Impedance
20Kohm
Signal/noise ratio
>99dB 20Hz-20kHz
Weight 20KG
Shipping Dimensions (wxdxh)
635mm x 590mm x 160mm
IS1200 Specifi cations
Output @ 8 ohms
2 x 400 watts
Output @ 4 ohms
2 x 600 watts
Frequency Response
<10Hz - >50kHz (-3dB)
THD
<0.03% @ 1kHz
Crosstalk 60dB
Damping Factor
250 into 8 ohms/ 125 into 4 ohms
Input Impedance
20Kohm
Signal/noise ratio
>105dB 20Hz-20kHz
Weight 25KG
Shipping Dimensions (wxdxh)
635mm x 590mm x 160mm
IS1600 Specifi cations
Output @ 8 ohms
2 x 500 watts
Output @ 4 ohms
2 x 800 watts
Frequency Response (-3db)
<10hz - >50khz (-3dB)
THD
<0.03% @1 Khz
Crosstalk
60dB
Damping Factor
250 into 8 ohms/ 125 into 4 ohms
Input impedance
20kohm
Signal/noise ratio
>90dB 20Hz-20kHz
Weight
22.0KG
Shipping Dimensions (wxdxh)
483mm x 452mm x 89mm
Architecture & Engineering Specifi cations
AMIS•600-1200-1600.indd 2
AMIS•600-1200-1600.indd 2
20/2/06 4:39:50 PM
20/2/06 4:39:50 PM
