7
Rear Panel
7 Balanced XLR Input
A female 3-pin XLR type connector is provided for each input:
Pin 1 = Signal Ground;
Pin 2 = Hot (non-inverting or in phase);
Pin 3 = Cold (inverting or reverse phase).
8 Balanced 6.35mm TRS Input
A female 6.35mm TRS connector is provided for each input.
Tip = Hot (non-inverting or in phase);
Ring = Cold (inverting or reverse phase);
Sleeve = Signal Ground.
9
Input Sensitivity Switch
This switch allows the amplifiers input sensitivity to be correctly matched to
the equipment providing the amplifiers input signal. See the Operation
section (page 12) for more details.
10
Parallel/Stereo Switch
This switch determines whether channels A & B are receiving separate signals
(i.e. Operating in stereo mode) or whether the input signal from channel A
is being fed through to channel B.
7
8
9
10
11
13
12
14
15
Summary of Contents for IS1200
Page 17: ...17 ...
