ES SERIES
INSTALLATION AND OPERATION MANUAL
10
NOTE:
Only connect one output – either 100V or 4
Ω
LINE OUTPUT
The LINE output XLR can be used to connect up to 6 booster amplifiers.
Balanced wiring (shielded pair cable) is recommended.
NOTE: When wiring the LINE output as unbalanced, Pin2 should be wired as hot
and Pin1 should be wired as ground/shield. Do not wire Pin3.
REC OUTPUT
The REC output wiring should be kept as short as possible.
INPUT CONNECTIONS
For wiring balanced in, pin 2 is hot. Unbalanced wiring on the microphone inputs
is not recommended.
Balanced input wiring (shielded pair cable) is recommended. Unbalanced RCA
wiring should be keep as short as possible.
Female XLR
Pin1 Gnd
Pin3 Cold -
Pin2 Hot +
Male XLR
Pin2 Hot +
Pin3 Cold -
Pin1 Gnd
RCA
Tip: Hot +
Shield: Gnd
ES60
ES120
ES250
166Ω
83Ω
40Ω
Minimum total
speaker impedance
ES60/ES120 only
INSTALLATION CONT.
