9.
Have gain controls on amplifiers turned down during power-up
to prevent speaker damage if there
are high signal levels at the inputs.
10.
Power down & disconnect units from mains voltage before making connections.
11.
Never hold a power switch in the “ON” position if it won’t stay there itself!
12.
Do not use the unit near stoves, heat registers, radiators, or other heat producing devices.
13.
Do not block fan intake or exhaust ports.
Do not operate equipment on a surface or in an
environment which may impede the normal flow of air around the unit, such as a bed, rug, weathersheet,
carpet, or completely enclosed rack. If the unit is used in an extremely dusty or smoky environment, the
unit should be periodically “blown free” of foreign matter.
14.
Do not remove the cover.
Removing the cover will expose you to potentially dangerous voltages.
There are no user serviceable parts inside.
15.
Do not drive the inputs with a signal level greater than that required to drive equipment to full
output.
16.
Do not connect the inputs / outputs of amplifiers or consoles to any other voltage source,
such as a
battery, mains source, or power supply, regardless of whether the amplifier or console is turned on or off.
17.
Do not run the output of any amplifier channel back into another channel’s input. Do not
parallel- or series-connect an amplifier output with any other amplifier output.
Australian Monitor Audio Inc is not responsible for damage to loudspeakers for any reason.
18.
Do not ground any red (“hot”) terminal. Never connect a “hot” (red) output to ground or to
another “hot” (red) output!
19.
Non-use periods.
The power cord of equipment should be unplugged from the outlet when left unused
for a long period of time.
20.
Service Information
Equipment should be serviced by qualified service personnel when:
A.
The power supply cord or the plug has been damaged.
B.
Objects have fallen, or liquid has been spilled into the equipment
C.
The equipment has been exposed to rain
D.
The equipment does not appear to operate normally, or exhibits a marked change in performance
E.
The equipment has been dropped, or the enclosure damaged.
Engineered in Sydney, Australia
www.australianmonitor.com
