INTRODUCTION
IMPORTANT SAFETY INSTRUCTIONS
Thank you for purchasing the AD Battery Charger (ADCHG128). This automatic stage charger will charge and
maintain your battery to its optimum.
The 9-Stage charging process is very comprehensive and will result in better charges and potentially increase the
life of your battery when used correctly.
Please ensure you read all the instructions below to get the most out of your AD battery charger.
When the battery is being charged you may notice bubbling in the fluid caused by the release of gas. As the gas
is flammable no naked lights should be used around the battery, and the area should be kept well ventilated.
Because of this risk of explosive gas, only connect and disconnect the battery leads when the mains supply is
disconnected.
WARNING
Ÿ
Before using the charger, please read and understand the instructions.
Ÿ
Provide adequate ventilation and prevent sparks and flames around charging area. Explosive gases may
escape from the battery during charging.
Ÿ
Designed For charging 12 Volt Lead Acid, AGM,Gel and Calcium batteries ONLY.
Ÿ
Disconnect the 240V AC mains supply before making or breaking the connections to the battery.
Ÿ
Connection to mains supply is to be in accordance with National wiring rules.
Ÿ
If the AC cord is damaged do not attempt to use charger. It must be replaced or repaired by a qualified
person.
Ÿ
Do not attempt to charge non-rechargeable batteries.
Ÿ
Corrosive substances may escape from the battery during charging and damage delicate surfaces. Store
and charge in a suitable area.
Ÿ
Never charge a frozen battery.
Ÿ
Ensure vehicle engine, ignition and accessories including lights, appliances etc are turned off prior to
charging.
Ÿ
This appliance is not intended for use by young children or any person with limited capabilities (mental and
physical) unless they have been adequately supervised by a responsible person to ensure that they can use
the appliance safely.
Ÿ
Please store disconnected and out of reach of unsupervised children
