6
ALC SIM 915303_19
SER
VICE MANU
AL (V
OL:1)
www.austlift.com.au
WEBBING INERTIA REEL BLO
CK
915303
STEP 5
STEP 6
Caution:
While lifting the Plain casing, the drum will unwind as you lift the
casing. Hold the webbing assembly to prevent the unwinding of the drum.
(as shown in the figure).
Now, take out the webbing along with the Hook & other Plastic parts from
the slot of the Ratchet casing by just pulling it up lightly & then release the
tension of the spring by unwinding the drum in anti clock wise direction as
shown in the above fig. You will need to unwind approximately 3 to 4 turns,
until the drum is completely free of tension. After relieving the tension, turn
the whole assembly upside down.
Drum
Direction of
Unwinding
Pull out the Webbing
assembly
Plain Casing
