For outlets without a center screw on the cover such as Decora outlets, simply open the removable
cover on the front of Austere Power and remove the screw.
Plug in Austere Power to your AC Power Line:
Be sure it is plugged into a standard, 3-wire
grounded 120V AC, 60Hz outlet.
Turn your power unit ON:
Press the power switch / reset button until the three LED indicator lights
illuminate blue, indicating the unit is On and connected to AC input power.
Review the LED status
indicator Lights:
Check the LEDs prior to connecting any of your equipment. They will indicate the
optimum operating conditions of power when it is plugged into a 120V AC outlet.
Power LED:
Will illuminate blue when lit. This indicates the surge protector is plugged
in and receiving power
Ground LED:
Will illuminate blue when lit. This indicates that the unit is plugged into a
properly grounded circuit. If the Ground LED does not illuminate, there is something wrong
with the electrical wiring to the AC outlet and we recommend having it inspected by a
licensed and insured electrician.
Protected LED:
Will illuminate blue when lit. This indicates that the surge suppression
components are intact and providing full protection against surges. When the Protected LED
no longer illuminates it is time to replace the unit.
Connect Your Equipment:
Plug your equipment’s power cords into power AC outlets. All Austere power products feature
expansive SmartFit outlets to accommodate your equipment’s transformers without covering
neighboring outlets. It is important to remember that you should NOT plug in extension cords
directly into the power unit. DO NOT OVERLOAD the surge protector’s outlets. The surge protector
