AussieCarHoists YL5000, User Manual

Page: 26 / 33

25 / 32
7.11
Hydraulic system connection
When routing the hydraulic hose, make sure that the hose is clear of any
moving part, make sure to keep the hose and fittings clean from dust.
Failure to do so may result in hydraulic line failure which may result in
damage or personal harm.
•
Fix the hydraulic power unit onto the support mounted on the power-side column using
the supplied screws and washers;
•
Route the hydraulic hoses referring to the below picture;
•
Tighten the fittings thoroughly.
Hydraulic drawing
Pump
7.12
Installation of Jack
•
Mount the jack rollers into the jack.
•
Adjust base extensions to accommodate the free distance between the rails of two runways.
•
Lift the jack beam onto the rails using hoisting equipment.