ausdom M05, User Manual, Page: 3 / 46

-2-
Connect the micro USB charging cable to any power source and the
USB interface for charging located on the side of the ear cup. The
headset LED turns to solid red during charging. It takes about 3-6 hours
Note: It is strongly recommended fully charging for the first use.
5. Pairing with Bluetooth Devices
Before pairing the headset with your computer, please make sure your
computer or laptop has the built-in Bluetooth feature. If not, you must
purchase a Bluetooth dongle, preferably version 2.1 or above.
1. Make sure the headset is off.
2. Start the Bluetooth program in the computer.
3. The “Search new device” screen will be displayed.
4. Do not place both devices more than one meter away from each
other.
5. Press the power button for 8-10 seconds until the LED flashes blue
and red alternately to enter pairing mode. You will hear “Ready to pair,
turn on Bluetooth , the pin code is 0000”. (4 zero)
6. As soon as the system detects the new device and select “AUSDOM
M05".
7. If your computer ask you to enter the PIN code, please enter 0000(4
zero). Once successfully paired, the LED turns to solid blue. You will
hear “Connected”
Bluetooth Headset English
5-2 Pairing the headsets with a phone
5-1Pairing the headsets with a computer
Micro USB charging cable
Micro USB interface for charging
Any power source for USB use
for the first charge and after charging for as long as 2-3 hours. When
the battery is fully charged the LED turns off.
You can also use the Bluetooth function during charging but will extend
the charging time. If you use the audio cable or turn the headset off for
charging that will not affect the charging time.
When the battery is low, the LED flashes red. At the same time M05
also provides a low battery warning tone.