1.Power On:
Press the power button located on the side of the unit for
2-3 seconds to power the unit on.
2.Power Off:
Press and hold the power button located on the side of
the unit for 5 seconds to power the unit off.it will prompt “shutdown in
5 secs".
3.Auto Power Off:
You have to enable the “Auto Power” feature in the
menu configurations to process power auto power off Setting. The unit
will automatically power off if no action is taken during the configured
time.
4.Screen light on or off:
When powering on the unit, the factory
default the screen light on. then press once to turn off the light,press
once again to turn on the light.
Note:
-
The unit can be recharged by connecting to the car’s lighter socket,
PC or USB power supplier with the supplied cable. When the unit is
connected to the PC for charging, please power the unit off to avoid
any potential damage caused by high circuit.
-
Before recording, the “Loop Recording” feature must be enabled
and the unit must be connected to the power supply.
Only use the supplied car charger with 5V output to charge the unit.
Non-compliant car charger will damage the unit and cause
malfunction.
Power the Unit On and Off
5.When the car engine is off, the unit will keep on recording for 15
seconds, and then automatically power off after saving the recordings.
Note:
If the device ever ‘crashes’, you can press to the factory default
settings and reboot.
The unit provides you a battery indication appeared on the upper left
of the screen clearly so that you can understand the current battery
status. (Refer to Picture 9)
Power Indication
Picture 9
EN
7
