EN
24
Value: Off/1 Minute/3 Minutes/5 Minutes
Note:
If loop recording is disabled, then once the memory card is full, and then
no more video will be able to be recorded until you delete old files on the
unit.
- Park Mode
If something hit the car, the unit will power on automatically and record 15
seconds, then the recording video will be saved. The unit will automatical-
ly power off after recording is completed.
Values: Off/On
Note:
This function will achieve in the power off condition of unit and have
enough light source.
- Image Quality
There are three quality values for the image quality. The value (ex. S.
Fine) used less compression and has the highest quality.
Values: S. Fine/Fine/Normal
- Mic Setup
Enable or disable microphone during video recording.
Values: Off/On
- Stamp Setting
Adding the current date, time and drive ID of the event to the video being
recorded and they will be displayed at the right bottom corner of videos.
Values: Date/Time/Drive ID
- Driver ID Setting
Stamp the car plate number to the recorded video.
- G-Sensor Setting
When the car is detected vibration and collision, the built-in G-Sensor
feature will automatically enter the Event Recording Mode to record 20
seconds and save the recorded images to event video folder. Real-time
locked the file to ensure that files will not be overwritten by Recycle
Record. This item allows you to adjust the sensitivity of the G-Sensor.
Values: Off/High/Medium/Low
Note:
G-sensor will be enabled in charging statue.
- WB