3. About OSD show
This product supports OSD show, which is used to show the status when switching the display mode.
The content of OSD is usually displayed in the upper left corner of the OUT1 output screen. When
there is a switch operation, OSD will be showed for about 15 seconds and then automatically hidden.
The contents of OSD include: output resolution, input channel and display mode.
You can choose to turn on/off the OSD show. Turning off the OSD show can help improve the speed
of switching between display modes.
4. RS232 remote control
This product supports RS232 remote command control and returns the status.
Connect the RS232 port of the splicer to the PC COM port by a RS232 uncrossed cable or USB to
RS232 adapter. Then install serial port tools in the PC can use RS232 control.
Parameter configuration of serial port on PC side
Baud rate
115200
Parity bits
NONE
Data bits
8
Stop bits
1
Serial port command table:
N0.
Send command
Return
ASCII
HEX
Instruction
Successful
Fail
1
!SW0#
0x21 0x53 0x57 0x30 0x23
Switch to OFF mode
!RC0#
NONE
2
!SW1#
0x21 0x53 0x57 0x31 0x23
Switch to 1X1 Split mode
!RC1#
NONE
3
!SW2#
0x21 0x53 0x57 0x32 0x23
Switch to 2X2 Spliced mode
!RC2#
NONE
4
!SW3#
0x21 0x53 0x57 0x33 0x23
Switch to 1X2 Spliced mode
!RC3#
NONE
5
!SW4#
0x21 0x53 0x57 0x34 0x23
Switch to 1X3 Spliced mode
!RC4#
NONE
6
!SW5#
0x21 0x53 0x57 0x35 0x23
Switch to 1X4 Spliced mode
!RC5#
NONE
7
!SW6#
0x21 0x53 0x57 0x36 0x23
Switch to 2X1 Spliced mode
!RC6#
NONE
8
!SW7#
0x21 0x53 0x57 0x37 0x23
Switch to 3X1 Spliced mode
!RC7#
NONE
9
!SW8#
0x21 0x53 0x57 0x38 0x23
Switch to 4X1 Spliced mode
!RC8#
NONE
10
!SW9#
0x21 0x53 0x57 0x39 0x23
Backward loop switch mode
!RCX# (X:0~8)
NONE
11
!SWA#
0x21 0x53 0x57 0x41 0x23
Forward loop switch mode
!RCX# (X:0~8)
NONE
12
!SWB#
0x21 0x53 0x57 0x42 0x23
Standby
!RCB#
NONE
13
!SWC#
0x21 0x53 0x57 0x43 0x23
Power on
!RCC#
NONE
14
!SWD#
0x21 0x53 0x57 0x44 0x23
Turn on the OSD show
!RCD#
NONE
15
!SWE#
0x21 0x53 0x57 0x45 0x23
Turn off the OSD show
!RCE#
NONE
