You can also set up a static IP here or revert the device to DHCP.
If you wish to set up a new static IP, make sure to select the ‘dhcp’ radio button to clear settings. Select ‘static’
afterward and enter in the desired IP address and other parameters. Go back to the home screen, but do not
open the Kiosk app yet. Enter the firmware page by appending ‘/setup’ to the IP listed on the Ethernet Page, and
enter ‘Network Settings’ in your browser. Make sure that the ‘Network Settings’ page reflects the configuration you
wish for.
IMPORTANT:
This setting
MUST
be saved in the ReAX Network Settings, and this will overwrite the system level
settings. Failure to save may revert the IP configuration to the previous state.
Now go back to the app drawer on the RXT-Series device and select ‘Kiosk’ to start the Kiosk.
11
