Page 4
Unpacking and Setting Up Your Globe
Keep your box and everything in it!
The box that your plasma
globe came in is specially made for protecting your plasma globe.
Although unlikely, from time to time plasma globes can fail, and
if that should happen, you will need your box so that we can
safely ship your plasma globe back to us for warranty repair or
replacement.
To set up your plasma globe, find a suitable location away from
direct sunlight, and preferably somewhere where you are able
to dim the lights. Remember to keep the globe away from any
metal objects or surfaces, as these may be a shock hazard when
the plasma globe is powered on. (The plasma globe has a low-
amperage current, so the shock is not dangerous. It’s more like a
shock of static electricity—safe, but unpleasant.) Once you have
your plasma globe in place, operating it is as simple as plugging it in
and turning it on.
To extend the life of the electronics and the gases in the plasma
globe, only leave the display turned on when there are people
around to appreciate it. In addition, do not leave the plasma globe
at full power for an extended period. All electronics slowly wear out
over time, so turning the globe off when you are not around will
ensure that you get the most out of the life of your globe.
Plugging in the power adapter
Power adjustment dial
