ONT-2-E4xxxi Multi-service Residential Gateway Series Hardware Installation Guide
4
UNRELEASED DRAFT
TM 87-10879 Rev. A
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
1.4.1
ONT-2-E4000i, ONT-2-E4020i, ONT-2-E4021i, and ONT-2-E4001i Models
The models that do not have Wi-Fi or wireless functionality meet the following regulatory requirements:
EMC
•
47 CFR 15 - Sub Part B, Class B
•
EN 55022 - Radiated and Conducted Emission for ITE
•
EN 55024 - Immunity for ITE
•
ETSI EN 300 386 - Electromagnetic compatibility and Radio spectrum Matters (ERM)
•
ICES-003 - Spectrum Management and Telecommunications Interference
•
VCCI – EMI Requirements
•
KN 22 - Radio disturbance characteristics
•
KN 24 - Immunity characteristics
Safety
•
IEC 60950-1 - ITE - Safety - General requirements
•
EN 60950-1 - ITE - Safety - General requirements
•
UL 60950-1 - Information Technology Equipment Safety
•
CAN/CSA-C22.2 No. 60950-1 - Safety of Information Technology Equipment
1.4.2
ONT-2-E4020iWn and ONT-2-E4021iWn Models
The models that have Wifi or wireless functionality meet the following regulatory requirements:
EMC
•
47 CFR 15 - Sub Part C, Class B
•
ETSI EN 300 328 - Electromagnetic compatibility and Radio spectrum Matters (ERM)
•
ETSI EN 301 489-17 - Electromagnetic compatibility and Radio spectrum Matters (ERM)
Safety
•
IEC 60950-1 - Safety - General requirements
•
EN 60950-1 - ITE - Safety - General requirements
•
UL 60950-1 - Information Technology Equipment Safety
•
CAN/CSA-C22.2 No. 60950-1 - Safety of Information Technology Equipment
It is herewith confirmed to comply with the requirements set out in the Council Directive on the Ap-
proximation of the Laws of the Member States relating to Electromagnetic Compatibility