7
User Guide
WEB SETUP PAGES
Ensure that your computer is connected to the switch in the network. If this is the first time to use switch,
do not need to do any additional configuration switch, you can use web access the switch.
Proceed as follows to:
1.
Modify the IP address of your computer for “192.168.0.2”, Subnet Mask for “255.255.255.0”
2.
Open a web browser and enter "192.168.0.10" in the address bar. 192.168.0.10 is the default
management address of the switch.
3.
Enter your username and password in the login authentication dialog, the initial user name is
“admin” and password is empty. Note: case sensitivity
4.
If authentication is successful, you can see the web page of the switch as below.
You can use this page for an overview of each function.
