AU
3432
ENG
11
Electric
STEAM IRON
CARE AND CLEANING
STORAGE
SPECIFICATIONS
Before cleaning the appliance make sure it is unplugged from the power supply and has completely
cooled down. to clean the exterior of your iron, wipe over with a damp soft cloth and wipe dry. never use
harsh abrasives to clean the soleplate as these will damage it.
empty the water tank and wind the power cord around the heel rest. to protect the soleplate from scratch-
ing, corroding or staining, always place the steam iron in an upright position on its heel rest.
Power source
220-240 V ~50 hz
Power
2000 Watt
DRY IRONING
the steam iron can be used on the dry setting
with or without water in the water tank, however
it is best to avoid having the water tank full while
dry ironing. turn the variable steam control to the
minimum position.
SELF-CLEANING
fill the water tank up to the maximum level and
then close it. set the temperature control dial to
its maximum position. Plug it to the power sup-
ply. Allow the iron to heat up until the indica-
tor light goes out. holding the iron horizontally
over the sink, change the steam control to the
“Self-clean” position and press the steam button.
Boiling water and steam will be ejected from the
holes in soleplate with impurities washed out.
rock the iron forwards and backwards during this
operation. repeat self-cleaning if you notice that
much impurity has been washed out. move the
iron over an old piece of cloth.
WHEN YOU FINISHED IRONING
set the iron vertically. turn the temperature con-
trol dial to “Min”. Unplug the iron from the power
supply. let it cool down completely. Wind the
cord. store the appliance vertically, to avoid dam-
aging the surface.
CAUTION!
empty the iron’s water tank after each use.
this symbol on the product and packaging means that used electrical and electronic products and batteries should not be
mixed with general household waste. they need to take special reception points. for more information on the existing systems
of waste collection, contact the local authorities. Proper disposal helps to save valuable resources and prevent potential nega-
tive effects on human health and the environment that may result from improper handling of waste.
