Aurora AU 3350, Manual, Page: 8 / 9

AU
3350 ENG
8
Hand blender
GETTING STARTED
Unpack the product and remove any packing material.
The body and all the parts thoroughly with a soft damp cloth. After that, wipe them dry.
CLEANING AND CARE
Before cleaning, disconnect the product from
the electrical outlet. Make sure the engine is
completely stopped. To clean the motor unit, use
a slightly damp cloth, then wipe it dry. Wash the tip-blender with warm soapy water immediately
(not soaking long time), then wipe dry with a
clean towel. Do not use the dishwasher.
SPECIFICATIONS
Power source 220-240V ~50Hz
Power 500 W
STORAGE
Before storage, ensure that the appliance is unplugged. Follow all of the items in this section CLEANING
AND CARE. Do not wrap the power cord to the engine block. Keep the product in a cool, dry and away
from children.
NOZZLE-BLENDER
The nozzle blender is suitable for preparation of
cream soups, various sauces and a sauce, and
also baby food, mixing of various cocktails. Be-
fore assembly be convinced that the product isn’t
connected to an electric network. Install a nozzle
in the motor block and record it clockwise. Be
convinced that assembly of a product is executed
properly. Connect the processor to the power
supply network. In order to avoid mix slopping,
before inclusion ship a nozzle in products which
need to be overworked. For turning on of the de-
vice press and hold the I button. This operating
mode is suitable for mixing of liquid products.
During the pressing and deduction of the II but-
ton the product will work at the maximum speed.
This operating mode is suitable for joint process-
ing of liquid and firm products.
NOZZLE-WHISK
Use a nozzle whisk only for beating of cream,
preparation of egg sponge or hashing of ready
desserts.
Before assembly be convinced that the product
isn’t connected to an electric network. Install
a nozzle in the motor block and record it clock-
wise. Be convinced that assembly of a product is
executed properly. Connect the processor to the
power supply network. Place products in capac-
ity before inclusion of a product. For turning on
of the device press and hold the I button. This
operating mode is suitable for mixing of liquid
products. During the pressing and deduction of
the II button the product will work at the maxi-
mum speed.
ATTENTION! Don’t use a nozzle whisk for mixing of
dough.
WORK