Aurora AU 3252, Manual

Page: 13 / 14

AU
3252
Multifunction cooker
ENG
13
Once you have selected a program, the display
will show the cooking time. Press “TIME COOK
/ Delay Start” once. On the display you will see
“ 00:00 ”. Use the “+” and “-” to set the desired cook -
ing time. After the time is set, the preparation will
start in 10 seconds. The “Rice / Rice / Rice» not be
adjusted and determined automatically by 45
minutes.
SET THE COOKING TIME
This feature allows you to delay the start time
of preparation. Select the program and press
the “TIME COOK / Delay Start” twice. The display
shows “
00:00
”. Use the “+” and “-” to set the desired
delay time of preparation. Multicooker starts to
cook, after a preset time. For example, if you want
to start cooking was 2 hours and 30 minutes us -
ing the buttons “+” and “-” on the display, set
2:30
.
The «Delay Start»
Make sure the appliance is unplugged and completely cool. Complete all requirements of section «CLEAN -
ING AND CARE». Keep Multicooker in clean, dry place.
STORAGE
SPECIFICATIONS
Power source 220-230 V, 50 Hz
Power 700 W
The product should be cleaned regularly and
remove from the surface of any leftover food.
Before cleaning, turn off Multicooker, unplug the
appliance and let it cool. Wipe the control panel,
the inner and outer surfaces with a damp cloth
and detergent, then wipe dry. Do not wash the
body in water or spray water on it. Wash the bowl
with warm water and detergent and wipe dry.
Remove the condensate container, wipe it with a
damp cloth and reinstall it.
WARNING!
Do not wash removable parts in the
dishwasher Multicooker.
CLEANING AND MAINTENANCE
Mode «Cooking mode / Temperature» starts au -
tomatically after cooking and keeps the tempera -
ture necessary for the dish. After cooking, the
display shows «
-:-
» . By clicking the «HEATING /
CANCEL». You can cancel this function. Pressing
enable this feature. Multicooker If not used, un -
plugs it from the network.
AFTER COOKING.
KEEPING THE TEMPERATURE