Aurora AU 3251, Manual, Page: 15 / 16

AU
3251
Multifunction cooker
ENG
15
This feature allows you to prepare a meal, set in -
dividual time and cooking temperature.
Press the “Multicook / Temperature.”
Press the “HOUR”, “MIN” to set the desired tem
-
perature.
For setting the time, press the “COOK TIME” indi
-
cator lights “cooking time”.
Press the “HOUR”, “MIN” to set the desired cooking
time according to the recipe.
After completing the settings, press the “START”.
At the end of the specified time multicooker off
automatically.
«MULTICOOK» FUNCTION
OPERATION SHEET
Place the food in the bowl, following the instruc -
tions in the recipe (see recipe book). Place the
bowl inside Multicooker. Close the cover until it
clicks. Multicooker connect to the mains. On dis -
play you will see «
88:88
».
Multicooker has 18 automatic programs, 48 pro -
grams mixed preparation, 6 cooking methods
– baking, frying, stewing, steaming, defrosting pi -
laf. Preparation of 8 kinds of products: beef, lamb,
pork, seafood, chicken, beans, carrots, vegetables
Press «MENU» many times as necessary to select
one of 18 automatic cooking programs, while, on
each of the selected programs will light LED: «Fried
rice», «Yogurt», «Bread», «Cake», «Warm milk»,
«Quick Cooking», «Noodle», «Slow Cooking», «As -
pic», «Pasta», «Milk porridge», «Bacon», «Pie», «Rice»,
«Porridge», «Pizza», «Soup», «Multicook». Once a
program is selected, press the «START».
When the program «Steam» must be used for ca
-
pacity steamer. In a bowl add water, put on the grill
products, place the rack in the bowl.
When multicooker works displayed while cooking.
The passage of time, cooking end. Programs for
«Rice» and «Pie» will be displayed elapsed cooking
time, instead of remaining time.
Press «TIME» using the «+» and «-» to select the cooking time. The programs «Rice» and «Pie» time pro -
grammed by default, so the cooking time for these two programs cannot be set manually and automati -
cally assigned.
SETTING THE COOKING
This feature allows you to delay the start time
of preparation. Select a program, and then click
«PRESET». The display shows «
00:00
». Press
«TIME» using the «+» and «-» to select the desired
delay time of preparation. Multicooker begin to
cook, after the preset time. For example, if you
want to start cooking was 2 hours and 30 minutes,
press «TIME», set the display to «
2:30
».
FUNCTION «TIMER»