3
User Guide
Front ASP-44-4K
Front
LCD Display
– Top row shows the input routed to relative Output number below.
Power LED
– When power is applied to the unit and the rear switch is set to the on position
the LED will illuminate.
EDID Auto
– If the EDID is set to automatically learn the output the LED will be lit.
EDID Manual
– If the EDID has been manually set to a specific EDID from an output the LED
will light accordingly.
Route
– Press this button at the end of setting up the Input and Output for the route to take
place.
Input
– Press this to choose the Input to route to an Output(s). If no number is pressed it will
unroute the current source routed to the selected output(s). If an Input is selected, pressing
the same input number will deselect. If input is selected after an output was selected first
then you can choose which inputs will store the associated outputs EDID.
Output
– After the input is selected press the Output button to choose one or more outputs to
route to. If output is selected first then it will allow for a single output to save its EDID to one
or more inputs.
1-4
– Input/output number selections
Save
– Preset save function. Press Save then a number to store a preset into one of the 4
locations of the current routing setup.
Recall
– Preset recall function to restore a saved preset from one of the 4 stored presets.
EDID
– Press this after the Output then Input has been set up for EDID learning.