Aurora Multimedia DXE-CAT-S1 User Manual Download Page 2

 

 

User Guide 

SAFETY INSTRUCTIONS 

 

Please review the following safety precautions. If this is the first time using this model, then read this 

manual before installing or using the product. If the product is not functioning properly, please contact 

your local dealer or Aurora for further instructions. 

 

 

The lightning symbol in the triangle is used to alert you to the presence of dangerous voltage 

inside the product that may be sufficient to constitute a risk of electric shock to anyone opening 

the case. It is also used to indicate improper installation or handling of the product that could 

damage the electrical system in the product or in other equipment attached to the product. 

 

 

The exclamation point in the triangle is used to alert you to important operating and maintenance 

instructions.  Failure to follow these instructions could result in injury to you or damage to the 

product. 

 

   

Be careful with electricity:

 

 

Power outlet

: To prevent electric shock, be sure the electrical plug used on the product power cord 

matches the electrical outlet used to supply power to the Aurora product. Use only the power adapter 

and power connection cables designed for this unit. 

 

Power cord

: Be sure the power cord is routed so that it will not be stepped on or pinched by heavy 

items. 

 

Lightning

: For protection from lightning or when the product is left unattended for a long period, 

disconnect it from the power source. 

 

Also follow these precautions: 

 

Ventilation

: Do not block the ventilation slots if applicable on the product or place any heavy object 

on top of it. 

Blocking the air flow could cause damage. Arrange components so that air can flow freely. Ensure 

that there is adequate ventilation if the product is placed in a stand or cabinet. Put the product in a 

properly ventilated area, away from direct sunlight or any source of heat. 

 

Overheating

: Avoid stacking the Aurora product  on top of a hot component such as a power 

amplifier. 

 

Risk of Fire

: Do not place unit on top of any easily combustible material, such as carpet or fabric. 

 

Proper Connections

: Be sure all cables and equipment are connected to the unit as described in 

this manual. 

 

Object Entry

: To avoid electric shock, never stick anything in the slots on the case or remove the 

cover. 

 

Water Exposure

: To reduce the risk of fire or electric shock, do not expose to rain or moisture. 

 

Cleaning

: Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the 

device before cleaning.   

 

ESD

: Handle this unit with proper ESD care. Failure to do so can result in failure.   

 

 

FCC 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 

(1)  This device may not cause harmful interference. 

(2)  This device must accept any interferences received, including interference that may cause undesired 

operation. 

 

 

Trademarks 

All trademarks in this document are the properties of their respective owners.  

 

Summary of Contents for DXE-CAT-S1














Reviews: